DE-HUMIDIFY AND HUMIDITY SETPOINT
> >
DE-HUMIDIFY SETPOINT: Allows you to reduce and maintain the relative humidity at a
specific setpoint.
> >
Please note that this feature functions in the COOL Mode only. Your PUREPRO
be configured to control a cooling unit such as an air conditioner of heat pump. Once you choose
De-Humidify follow these easy steps:
• The DH SETPOINT with - and + icons allow you to lower and raise your setpoint
> >
Example of typical use of the De-Humidify function: In order to de-humidify you must set the de-humid-
ify setpoint below the current relative humidity. Your PUREPRO
regulate temperature to the cooling setpoint while monitoring and lowering the room humidity.
Since the De-Humidify feature uses the COOL Function of your Air Conditioner or Heat Pump,
your PUREPRO
TM
thermostat will turn off the air conditioning if either the dehumidifier setpoint or
temperature setpoint is reached - which ever comes first.
22
TM
hermostat must
TM
thermostat will both lower and
PUREPRO
TM
DP732T