Advanced Settings - Humidity Settings - Lux Products PUREPRO DP732T Instruction Manual

ADVANCED SETTINGS - HUMIDITY SETTINGS

> >
IMPORTANT: The Automatic Humidity Control feature can only be activated when used
with the LUXPRO ® Outdoor Wireless Temperature Transmitter and Receiver. Please install
the LUXPRO ® Outdoor Wireless Temperature Transmitter and Receiver before activating
this feature.
Automatic Humidity Control: Automatic humidity control is an option that lets your system automat-
ically adjust indoor humidity based on current outdoor conditions. This function minimizes destruc-
tive condensation build-up on your windows.
• HUM FAN: ON - fan runs when there is an independent demand to humidify. OFF: fan only runs
when there is a demand to humidify while heating or cooling.
• DH FAN: ON - fan runs when there is an independent demand to dehumidify. OFF: fan only runs
when there is a demand to dehumidify while cooling.
• DH REVERSE: ON - DH relay is normally closed when relative humidity is above DH set point.
OFF: DH relay is normally open when relative humidity is above DH set point.
• DH CONTROL COMPRESSOR: ON - Thermostat will turn off the air conditioning if either the dehu-
midify set point or the temperature set point is reached, whichever comes first, both DH relay and
compressor will turn off. OFF: DH relay is independent of compressor activity (DH becomes a spare
relay and can be used for a variable speed fan or separate dehumidifier or air exchanger)
INSTRUCTION MANUAL 39