[Table 1] Operation status
The set items are displayed at operation status.→Refer to 2-1-1.
Color
Light blue
Pink
Purple
Rainbow
Gray
Yellow
―
Display icon
En-16
Icon
The operations of groups and R.C.G. are "Cool" or "Dry".
The operations of groups and R.C.G. are "Heat".
The operations of groups and R.C.G. are "Fan", "Auto", or "Custom Auto".
The operation modes of groups are mixed.
The operations of all groups and R.C.G. are stopped.
Even one unit of groups or R.C.G. is on a test operation. (Displayed regardless
of operation mode)
The icons of "R.C. prohibition", "Temp. upper and lower limit", and "Schedule"
are displayed when "Management Status" is checked.→Refer to 2-1-1.
When the room temperature is out of the room temperature sensor range, the
icon of over upper limit or below lower limit is displayed.→Refer to 2-1-1.
When the "Room Temp." in the "Operation Status" is checked, the icon of the
room temperature is displayed. →Refer to 2-1-1.
: Room temperature detected by wired remote controller or option sensor
: Room temperature detected by indoor unit sensor (Room temperature may
be different from the actual room temperature. When this icon is displayed,
room temperature is just for reference only. )
• When refrigerant leak, error, mismatch mode, or filter sign occurs at even
one unit, the icon is displayed.
• When refrigerant leak and error occur at the same time, refrigerant leak is
displayed preferentially.
Operation status