Charging The Battery - Panasonic HM-TA2 Operating Instructions Manual

Preparation

Charging the battery

When this unit is purchased, the battery is not charged. Charge
the battery fully before using this unit for the first time.
Important:
≥ This unit has a built-in rechargeable lithium-ion battery. Do not
remove except when disposing of this unit.
≥ The battery will not be charged if the unit is turned on.
≥ The battery can also be charged using the AC adaptor (optional).
(l 16, 22)
1
Take out the USB terminal.
≥ Be careful as the USB terminal will jump out.
HM-TA20
1 Slide the LOCK lever for the USB terminal cover A to release the
lock on the open/close lever for the USB terminal cover B.
2 Open the USB terminal cover while sliding the open/close lever for
the USB terminal cover B in the direction indicated by the arrow.
3 Press the USB Latch C until the USB terminal comes out.
HM-TA2
1 Slide the USB Latch A until the USB terminal cover opens.
2 Slide the USB Latch A again until the USB terminal comes out.
21
VQT3P01