Beaming Information With Ir - Palm Treo 800W User Manual
Smart device
Hide thumbs
Also See for Treo 800W:
- Specifications (2 pages) ,
- Get started (2 pages) ,
- User manual (350 pages)
Table of Contents
Advertisement
3.
Go to your Today screen, and then tap Bluetooth
4.
Select the Mode tab and check the Turn on Bluetooth box to turn on the Bluetooth
feature on your Treo.
5.
Press OK
6.
Press Start
7.
Select ActiveSync
8.
Press Menu
9.
If this is the first time you're making a Bluetooth connection to this computer, follow the
onscreen prompts to set up a Bluetooth partnership with this computer.
10.
Select Sync.
11.
When synchronization has finished, press Menu
Disconnect Bluetooth.
Tip
Beaming Information With IR
Your Treo is equipped with an IR (infrared) port that lets you beam information to another
device that has an IR port. The IR port is located on the side of your device closest to the
stylus, near the top.
200
.
and select Programs.
.
(right softkey) and select Connect via Bluetooth.
Wi-Fi routers, microwaves, and wireless telephones using the 2.4GHz band
may interfere with Bluetooth connections. For best results, move away from
this equipment when making a Bluetooth connection. If you cannot move
away, move the Bluetooth devices closer to improve the reception.
.
(right softkey) and select
Section 3F: Using Wireless Connections
Advertisement
Table of Contents
