Palm Treo 680 User Manual page 33

Nothing happens when I press a key
Do a soft reset by removing the battery and reinserting it.
I don't want Keyguard to turn on automatically
1. Press Applications
2. Select Keyguard.
3. Select the Auto-Keyguard pick list, and then select Disable.
4. Select Done.
5. (Optional) To manually turn Keyguard on, press Option
touchscreen is on.
Synchronization isn't working
Try to sync after each of the following steps. If the sync is successful, you don't need to do the rest
of the steps. If you still can't sync after finishing the steps, check Your Palm Treo 680 Smart Device
User Guide on the CD for more troubleshooting tips.
1. Make sure the USB sync cable is securely connected to your Treo and to a built-in USB port on
your computer (not on a USB hub). See "Synchronize for the first time" on page 22 for details.
2. Make sure that HotSync manager is running:
Right-click HotSync manager
Windows:
computer screen, and make sure that Local USB is checked. If you don't see the HotSync
manager icon, click Start>Programs>Palm>HotSync Manager.
Go to the Palm folder on your Mac hard drive and double-click HotSync manager
Mac:
In the Connection Settings panel, set the Local Setup port to Palm USB.
3. Do a soft reset by removing the battery and reinserting it.
Treo 680
and select Prefs .
in the taskbar in the lower-right corner of your
+ Power/End when the
.
31