Palm Treo 680 User Manual page 25

Synchronize for the first time
3. Select the same language you selected on your Treo 680, and then
follow the onscreen instructions.
4. When the install program asks you to sync, connect the USB sync cable
to a USB port on your computer and to the socket on the bottom of
your Treo 680.
5. Press the sync button.
USB sync
cable
Messages on both your computer and your Treo indicate that
synchronization is in progress. Do not disconnect the sync cable until you
see the message on your Treo saying that the HotSync
Next time you want to sync, just connect your Treo 680 to your computer
(using the sync cable) and then press the sync button.
Treo 680
Sync button
®
operation is done.
. . . . . . . . . .
Tip
Problems
synchronizing? See
"Synchronization
isn't working" on
page 31 for
troubleshooting
suggestions.
23