TECHNICAL DATASHEET
PMT Panel Mount Power Supply
5 V 50 W 1 Phase / PMT-5V50W1A□
Environment
Surrounding Air Temperature
Power De-rating
Operating Humidity
Operating Altitude
Shock Test (Non-Operating)
Vibration (Non-Operating)
Pollution Degree
Protections
Overvoltage
Overload / Overcurrent
Over Temperature
Short Circuit
Protection Against Shock
*PE: Primary Earth
Reliability Data
MTBF
Expected Cap Life Time
Safety Standards / Directives
Electrical Safety
CE
UKCA
Galvanic Isolation
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
3
www.DeltaPSU.com (February 2022, Rev. 08)
Operating
-10°C to +70°C
Storage
-25°C to +85°C
> 50°C de-rate power by 2.5% / °C
< 100Vac de-rate power by 1.33% / V
(80% load @ 85Vac)
5 to 95% RH (Non-Condensing)
0 to 5,000 Meters (0 to 16,400 ft)
IEC 60068-2-27, Half Sine Wave: 50G for a duration of 11 ms,
3 shocks for each 3 directions
IEC 60068-2-6, Random: 5 Hz to 500 Hz (2.09 Grms);
20 min per axis for all X, Y, Z direction
2
5.75-7.50 V, SELV Output, Hiccup Mode,
Non-Latching (Auto-Recovery)
105-150% of rated load current, Hiccup Mode,
Non-Latching (Auto-Recovery)
Non-Latching (Auto-Recovery)
Hiccup Mode, Non-Latching
(Auto-Recovery when the fault is removed)
Class I with PE* connection
> 700,000 hrs. as per Telcordia SR-332
I/P: 100 Vac, O/P: 100% Load, Ta: 35°C)
10 years (115 Vac & 230 Vac, 50% load @ 40°C)
TUV Bauart
EN
60950-1, EN 62368-1
UL/cUL recognized
UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E131881)
UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E131881)
CB scheme
IEC 60950-1, IEC 62368-1
BIS
IS 13152-1
In conformance with EMC Directive 2014/30/EU and Low
Voltage Directive 2014/35/EU
In conformance with Electromagnetic Compatibility Regulations
2016 and Electrical Equipment (Safety) Regulations 2016
Input to Output
3.0 KVac
Input to Ground
1.5 KVac
Output to Ground
0.5 KVac