Omron V330-F Series Quick Start Manual page 44

Category
4. Send Processing 4.1. Send Processing Status
4.2. Send Processing Time
4.3. Send Instruction
5. Receive 5.1. Receive Processing
Processing
5.2. Receive Wait Time
5.3. Receive Processing
5.4. Receive Instruction
5.5. Get TCP Status
5.6. Code Reader Error
6. Close Processing 6.1. Close Processing Status
6.2. Close Processing Time
6.3. Close Instruction
6.4. Get TCP Status
7. Processing Error 7. Processing No. Error
Processing
Subcategory
Judgment and Execution
Flag Setting
Monitoring Timer
Execution
Execution
Status Judgment and
Execution Flag Setting
Monitoring Timer
Execution
Time Monitoring Timer
Execution
Execution
Processing Execution
Judgment Instruction
Execution
Judgment and Execution
Flag Setting
Monitoring Timer
Execution
Execution
Processing Execution
Processing
Description
Starts processing if the Send
Processing Required Flag is set to
Required and open processing has
ended normally.
Starts processing if the Receive
Processing Required Flag is set to
Required and send processing has
ended normally.
If receive data arrives in segments,
receive processing is repeated.
Stores and checks the receive data.
Executes close processing.
Processing starts in the following
cases.
• Receive Processing Required Flag
is set to Not required and send
processing has ended normally.
• Receive processing ends normally.
• Open processing, send processing,
or receive processing ends with an
error.
Executes error processing if a
non-existent processing number is
detected.
9. Project File
41