Omron V330-F Series Quick Start Manual page 18

11
The Advanced Settings Screen
appears.
Select the Communications
Tab and check the settings for
Ethernet shown in the red
frame.
To use the defaults, you do not
need to change the settings.
If you need to change the IP
address, for example when
connecting multiple code
readers, change the IP Address
and subsequent settings as
necessary.
12
Click on the icon shown in the
red frame to save the settings to
the code reader.
13
Finally, check the version
number of the code reader.
Click on the gear icon on the
upper right of the screen and
select About WebLink.
7. Connection Procedure
15