Omron V330-F Series Quick Start Manual page 23

7.3.3. Going Online and Transferring the Project Data
Place the Sysmac Studio online and transfer the project data to the controller.
1
Select Communications Setup
from the Controller Menu.
2
The Communications Setup
Dialog Box is displayed.
In Connection type, select the
Direct connection via USB
Option.
Click OK.
3
Select Online from the
Controller Menu.
A confirmation dialog box
appears. Click Yes.
* The dialog box displayed
differs depending on the status
of the controller being used.
Select Yes to proceed with the
operation.
Note
Refer to Section 6 Online Connections to a Controller in the Sysmac Studio Version 1
Operation Manual (Cat. No. W504) for details on online connection to the controller.
7. Connection Procedure
20