National Instruments 6583R User Manual And Specifications page 10

Table 4. NI 6583 Single-Ended Signals and NI FlexRIO FPGA Module Signals (Continued)
Connector
DDC A (Single-ended I/O)
Note For the DIO and PFI lines, drive the GPIO Direction high for output and low for input.
For CLK OUT, drive the GPIO Direction high for enable and low for disable.
NI 6583R User Guide and Specifications
NI 6583
Signal Name
DIO 26
DIO 27
DIO 28
DIO 29
DIO 30
DIO 31
PFI 1
PFI 2
PFI 3
STROBE
CLK OUT
NI FlexRIO FPGA Module
GPIO I/O
GPIO_50_n
GPIO_13_n
GPIO_32_n
GPIO_31_n
GPIO_49_n
GPIO_33_n
GPIO_0_n
GPIO_18_n
GPIO_1_n
GClk_SE
GPIO_17_n
10
GPIO Direction
GPIO_50
GPIO_13
GPIO_32
GPIO_31
GPIO_49
GPIO_33
GPIO_0
GPIO_18
GPIO_1
—
GPIO_17
(as enable)
ni.com