Air Flow Range Setting; Wireless Lan Connection Function - Mitsubishi Heavy Industries SRK63ZR-WF Technical Manual

(c) OFF timer operation

(13) Air flow range setting

wireless
(a) Setting
(i) If the air-conditioning unit is running, press the ON/OFF button to stop.
The air flow range setting
(ii) Press the AIR FLOW U/D (UP/DOWN) button and the
AIR FLOW L/R (LEFT/RIGHT) button together for 5 seconds
or more.
The air flow range setting
(iii) Setting the air-conditioning installation location.
display is switched in the order of:
(Center installation)
Air flow range
(Left end installation)
(iv) Press the ON/OFF button.

(14) Wireless LAN connection function

(a) Operating conditions
When a signal of wireless LAN connection setting was received from a remote control during all air-conditioners stop
(b) Detail of operation
(i) A signal which corresponds to the signal received from a remote control is sent to air-conditioner.
(ii) A buzzer for confirmation of receipt rings.
(c) Reset conditions
When either of the following conditions is satisfied
(i) When a reception complete signal was received from interface
(ii) When an interface communication setting OFF signal was received from a remote control
L/R
L/R
(Right end installation) (Left end installation)
Air flow range
(Center installation)
air flow range is set.
air flow range (while the air flow range setting display illuminates).
42
- -
'22 • SRK-T-362
( i ),( iv )
( ii ),( iii )
( ii )
Air flow range
(Right end installation)