JVC HR-S7600AM Instructions Manual page 43

STOP/EJECT
TIMER S-VHS ET
STANDBY/ ON
TV PROG
S-VIDEO (S-2) VIDEO (MONO) L —AUDIO— R
SYNCHRO EDIT
PLAY
STO P
Downloaded from: https://www.usersmanualguide.com/
PLAY
PAUSE
INSERT A.DUB
SP/LP/EP COLOUR SYSTEM REC
AU D IO
1 2 3
2
4 5 6
7 8 9
0
4
1
PAU SE
ST ART DUBBIN G
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
● " " blinks and " " is displayed on the front display
REW FF
DIGITAL
TBC/NR
● To stop dubbing temporarily, press
JOG
SHUTTLE
EN D AUDIO DUBBIN G
6
Press STO P to stop the tape in your recorder, and
engage the audio component's Stop mode.
N O TES:
● When monitoring the sound during Audio Dubbing, the normal
soundtrack is automatically selected. If you wish to hear the
mixed sound (Hi-Fi + Normal soundtracks), press AU D IO on
the remote control to select "
( pg. 17).
● Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
● Audio dubbing is also possible using the rear panel AUDIO
IN L + R connectors. When using these connectors, make
sure to select the correct input mode in step 2 .
● Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
● When playing back an audio-dubbed tape, press
the remote control to select the soundtrack you wish to hear
( pg. 17).
panel.
PLAY to resume dubbing.
NORM
43
EN
PAU SE . Press
(HI FI + NORM)"
AU D IO on