JVC HR-S7600AM Instructions Manual page 15

High-Speed Sea rch
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY .
N O TES:
● For short searches, press and hold
or still picture. When released, normal playback resumes.
● TimeScan will be automatically engaged during high-speed
search other than EP recorded NTSC tape.
Index Sea rch
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
N O TE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE IN DEX SEARCH
1
Press PU SH JO G
control. " ™ 1" or " £ 1" is displayed on screen and
search begins in the corresponding direction.
● To access index codes 2 through 9, press
or repeatedly until the correct index number is
displayed.
Ex.: To locate the beginning of B from the current
position, press PUSH J OG
To locate the beginning of D from the current
position, press PU SH J O G
● When the specified index code is located, playback
begins automatically.
Sk ip Sea rch
SKIP O VER UN WAN TED
SECTIO N S
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
N O TE:
To return to normal playback during a Skip Search, press PLAY .
Downloaded from: https://www.usersmanualguide.com/
FF or REW during playback
( ™ or £ ) on the remote
or
PU SH JO G
twice.
once.
Current position
A B C D E F
–2 –1 1 2 3
Index number
M a nua l Tra ck ing
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PRO G buttons.
O VERRIDE AUTO MATIC
TRACKIN G
1
Press
tracking.
ADJUST TRACKIN G
MAN UALLY
2
Press TV PRO G + or – to adjust tracking.
£ 2
RETURN TO AUTO MATIC
TRACKIN G
3
Press
automatic tracking.
N O TE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Repea t Pla yba ck
Your video recorder can automatically play back the whole tape
50 times repeatedly.
ST ART PLAYBACK
1
Press PLAY .
ACTIVATE REPEAT
PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
● The Play indicator ( ) on the display panel blinks
slowly.
● The tape plays 50 times automatically, and then
stops.
STO P PLAYBACK
3
Press STO P at any time to stop playback.
N O TE:
Pressing PLAY , REW , FF or PAU SE also stops Repeat Playback.
(SP/ LP/ EP) on the remote to engage manual
(SP/ LP/ EP) on the remote to re-engage
15
EN