JVC HR-S7600AM Instructions Manual page 22

22
EN
C.RESET
Downloaded from: https://www.usersmanualguide.com/
1 2 3
2
4 5 6
7 8 9
0
4
1
Ela psed Recording Time
Indica tion
You can check the exact time of a recording.
SET CO UN TER DISPLAY
D ISPLAY
1
Press D ISPLAY until a counter reading appears on the
dispay panel.
RESET CO UN TER
2
Press C. RESET before starting recording or playback.
● The counter is reset to "0:00:00" and shows the exact
Ta pe Rema ining Time
DISPLAY REMAIN IN G TIME
1
Press D ISPLAY until the time remaining on the tape
appears.
● The display panel shows the tape remaining time with
● By pressing the
N O TE:
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "– –:– –" may sometimes appear, or the display
may blink on occasion.
RECO RD IN G (cont.)
elapsed time as the tape runs.
" " displayed.
D ISPLAY button, you can change the
display to show the counter reading, channel
position*, clock time or tape remaining time.
* Channel position is not displayed during playback.