JVC HR-S7600AM Instructions Manual page 31

N U M BER
STO P+/ –
PRO G
Satellite Tuner U sers
To timer-record a satellite broadcast using the G-
system:
1 Perform steps
1 – 6 .
2 Set the satellite tuner to the appropriate channel before
the selected programme begins.
3 Leave the satellite tuner's power on.
Downloaded from: https://www.usersmanualguide.com/
1 2 3
2
4 5 6
W EEKLY
8 9
7
TIM ER
0
4
1
O K
PU SH JO G
RETURN TO N O RMAL
SCREEN
5
Press PRO G or O K . "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears.
● Repeat steps
EN GAGE RECO RDER' S
TIMER MO DE
6
Press TIM ER . The recorder turns off automatically and
" ‰ " appears on the display panel.
● To disengage the timer, press
N O TES:
● To Change The Stop Time . . .
. . . press STO P +/ – after pressing O K in step 3 . You can
compensate for anticipated programme schedule delays this
way.
● To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing O K in step 3 , press W EEKLY ( N U M BER key
"9") for weekly serials or D AILY ( N U M BER key "8") for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
● You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
● It is not possible to timer-record a TV programme with a
G- number which starts with "0".
CODE
ATTEN TIO N
CODE
Regarding Guide Program N umber Set
"G-CODE/SHOWVIEW SETUP" appears after performing
step 3 if the Guide Program number for the G-
you entered has not been set.
● Press the
channel position number on which your recorder
receives that station, then press O K or PU SH JO G
The G-
G-CODE/SHOWVIEW SETUP
GUIDE PROG
2
[0-9] OR [5/ ∞ ]:SELECT =
[PROG] : EXIT
1 – 5 for each additional programme.
TIM ER again.
pg. 34).
N U M BER keys or PU SH JO G
program screen appears.
CODE
(Ex.) To timer-record a RTR
programme with the G-
TV PROG
system.
* If your recorder receives
– –
RTR on the channel position
2, press O K or PU SH J O G
after entering "2".
31
EN
number
CODE
%fi to input the
.
CODE