Download Options - Siemens Healthineers UniPOC RAPIDPoint 500 Configuration Manual

RAPIDPoint 500/RAPIDPoint 500e Configuration Guide
the Tree. Breaking the Parent-Child relationship is necessary to enable configuration settings
different from the global Organization or Facility.
Refer to the UniPOC User's Manual for more information about the Location Tree Parent-
Child Relationship.
•
Click the Restore Default Configuration button to re-establish a Parent-Child relationship
that was severed in error or when the configuration settings should be the same as its parent
(Facility, Department or Location). This action will save the configuration from the parent.
•
To cancel the configuration action without saving, go to a screen other than the Instrument
Configuration screen.

4.1 Download Options

When a device is placed into operation for the first time, all data that can be downloaded from UniPOC to
the model are automatically activated from this screen. This tab is used to set the download options. When
you enable a download, all pre-existing data of that type stored on the device will be overwritten. Once
enabled, options can be disabled at any time.
Note: When a selected download option is disabled, any previously downloaded data of that download type
will be removed from the device when the device receives its new configuration.
Explanation of the parameters
Enable download of the following
data:
 Device users
Table 1: Downloads Options
RAPIDPoint 500/RAPIDPoint 500e Configuration Guide
If selected, device users' data will be downloaded.
11555620, Rev. A, 2020-09 Page 6/8