Upper Rack; Lower Rack - Haier GE GDF450P R0 Series Technical Service Manual

Upper Rack

The upper rack is non-adjustable. It is fixed to
one position.
To remove the rack from the dishwasher, pull the
rail assembly out a few inches for easier access.
Press the tab on the end cap to the center of the
dishwasher and pull the end cap off the rail.
Upper Rack Rollers and Brackets
The upper rack roller brackets are locked into
place with a clip. The clip must be removed to
remove the roller brackets from the rack. Press
in on the tab and lift the locking clip.
Tub Rollers
The tub rollers are attached to the tub with a
screw in each roller.
To Remove the Tub Rollers
1. Remove the upper rail by removing the rear
end cap.
2. Remove the T20 Torx-head screw securing
each roller to the tub.
Tub
Roller
T20 Torx Screw

Lower Rack

Several lower racks are available with different
tine configurations; consult the Owner's Manual
for details on the lower racks.
The lower rack roller assemblies consist of
brackets and rollers. They are universal and can
be used on either side of the lower rack.
– 30 –
Tub
Thrust
Washer
Rollers
Brackets
(Continued next page)