User Caution - AMT Datasouth Fastmark M7XPd User Manual

Operational safety

User Caution

⚫
Refer to the product label (back of the
printer) and verify your power source
exactly meets those requirements.
⚫
Do not use this product near heat or
water.
Cautions in setting up
⚫
Unpack the printer. Make sure that the
printer body and all accessories are
included in the package and no parts are
damaged.
⚫
Do not use the printer in a location
exposed to direct sunlight or close to a
heater or other heat generating
equipment.
⚫
Place the printer on a rigid, horizontal
base in a location that is free of vibration.
⚫
Refer to print adjustments in this manual
before attempting alignments.
⚫
Do not turn off the printer during printing,
as this may lead to a malfunction.
"VORSICHT"
Explosionsgefahr bei unsachgemäßen Austaush der Batterie. Ersatz nur durch denselben oder einem
vom Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angabren des
Herstellers.
Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment.
CAUTION
⚫
Mechanical and electrical repairs
should be conducted by qualified
service personnel.
⚫
Unplug this product from the power
outlet before cleaning.
ATTENTION
⚫
Any changes or modifications not
expressly approved by the grantee
of this device could void the user's
authority to operate the equipment.
⚫
Before connecting or disconnecting
the interface cable, be sure to turn
off the printer.
⚫
Hazardous moving parts in cutter
module. Keep finger(s) and other
body parts away.
⚫
The main circuit board includes real
time clock feature and has lithium
battery CR2032 installed. Risk of
explosion if battery is replaced by an
incorrect type. Dispose of used
batteries according to the
manufacturer instructions.
- 5 -