Table of Contents
Advertisement
Ethernet Interface Settings
NetFinder search
1.
Power on the printer, connect the LAN Ethernet cable to the printer port
located on the bottom of the printer. Verify the Ethernet port LED
indicates a normal connection.
Yellow LED
ON
OFF
2.
Run NetFinder software (provided on CD shipped with the printer).
Key Description:
Exit — Exit from the software
Search — Search for printers in the same LAN
Assign IP — Modify the IP address and other settings for the specified printer.
Click the "Search" key, the dialog box appearing will begin searching
3.
automatically listing printers found in the network. The time is counting
down in the progress bar (10 seconds) and the search will finish as soon
as the time is over.
Green LED
Blink
Connecting to network
OFF
Not connecting to network
- 28 -
Description
Advertisement
Table of Contents
