Dremel Lite 7760 Operating/Safety Instructions Manual page 31

Find Quality Products Online at:
Note: Each number settings listed in the speed charts = x 1,000 RPM
* Speed for light cuts, Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Note that the recommended speed may not be suitable for your rotary tool model.
Catalog Soft Hard
Number Wood Wood
502, 503, 504, 505 25-35 18-24
Catalog Soft Hard
Number Wood Wood
511E, 512E 12-17 12-17
Catalog Soft Hard
Number Wood Wood
EZ471SA, EZ472SA,
5-17 5-17
EZ473SA
Catalog Soft Hard
Number Wood Wood
150 25-35 18-35
Catalog Soft Hard
Number Wood Wood
662DR, 663DR -
Catalog Soft Hard
Number Wood Wood
569, 570 For use on wall and floor grout
GlobalTestSupply
www.
Speed Settings
Flapwheels
Laminates Steel Aluminum,
/Plastics Brass, etc.
5-8 25-35 18-35
Finishing Abrasive Buffs
Laminates Aluminum,
Steel
/Plastics Brass, etc.
9-11 12-17 12-17
Detail Abrasive Brushes
Laminates Aluminum,
Steel
/Plastics Brass, etc.
5-17 5-17 5-17
Drill Bit
Laminates Aluminum,
Steel
/Plastics Brass, etc.
5-11 - 12-17
Glass Drilling Bits
Laminates Aluminum,
Steel
/Plastics Brass, etc.
- - - -
Grout Removal Bits
Laminates Aluminum,
Steel
/Plastics Brass, etc.
31
Shell/
Stone Ceramic Glass
- - -
Shell/
Stone Ceramic Glass
- - -
Shell/
Stone Ceramic Glass
- - -
Shell/
Stone Ceramic Glass
- - -
Shell/
Stone Ceramic Glass
5-17 5-17 5-17
Shell/
Stone Ceramic Glass
- 12-24 -
.com
sales@GlobalTestSupply.com