CAUTION
Keep the system sensors
» fig. 254
■
do not cover with any objects of any kind, otherwise the system functioning
may be impaired.
Under adverse weather conditions (heavy rain, water vapour, very low or high
■
temperatures, etc.), the system function may be limited - "incorrect recogni-
tion of obstacle".
Accessories additionally installed on the vehicle rear (such as bicycle carriers)
■
can impair the system function.
Settings in Infotainment
Read and observe
and
›
In Infotainment, in menu
/ tap on function surface → Parking and ma-
noeuvring.
ParkPilot - Settings for the parking aid
■
Activate automatically - Activate/deactivate the compact parking aid display
■
(when driving forwards)
Front volume - Setting the volume of the beeps for front obstacle detection
■
Front tone setting - Setting the pitch of the beeps for front obstacle detection
■
Rear volume - Setting the volume of the beeps for rear obstacle detection
■
Rear tone setting - Setting the pitch of the beeps for rear obstacle detection
■
Entertainment fading while parking - Lowers the audio volume (e.g. radio volume)
■
with the parking aid activated
■
Manoeuvre braking - Activation/deactivation of automatic emergency braking
210
Driving
on page 210 clean, snow-and ice-free and
on page 209 first.
Operation
Fig. 254 Installation location of the sensors on the left side of the vehi-
cle: front/rear
Read and observe
and
The system uses ultrasound waves to calculate the distance between the
bumper and an obstacle. The ultrasonic sensors are, depending on vehicle
equipment, located in the back or in the front bumper
Depending on the equipment, the following system versions are possible
» fig.
255.
Variant 1: warns of obstacles in the areas
▶
▶
Variant 2: warns of obstacles in the areas
▶
Variant 3: warns of obstacles in the regions
Fig. 255
Sampled areas and range of the
sensors
on page 209 first.
» fig.
254.
,
.
C
D
,
,
,
.
A
B
C
D
,
,
,
,
.
A
B
C
D
E