Table of Contents
Advertisement
WARNING
Please take note of the general points relating to the use of assistance
■
systems
» page 206,
in chapter Introduction.
Having the correct tyre inflation pressure is always the driver's responsi-
■
bility. Tyre pressure should be checked regularly
The system cannot warn in case of very rapid tyre inflation pressure loss,
■
e.g. in case of sudden tyre damage.
Before storing the pressures, the tyres must be inflated to the specified
■
inflation pressure
» page
266. If the wrong pressure valuesare stored, the
system may not issue any warnings, even if the tyre pressure is too low.
CAUTION
To ensure proper system function, the tyre pressure values must be stored ev-
ery 10 000 km or 1x a year.
Storing the tyre pressure values and Infotainment display
Read and observe
and
Procedure for storing the tyre pressure values
›
Inflate all the tyres to the specified pressure.
›
Turn on the ignition and switch on Infotainment.
›
In Infotainment, in menu
/ tap on function surface Tap → Vehicle sta-
tus.
›
Use the function surfaces select the Tyre Pressure Loss Indicator menu
item.
›
Tap the functional surface
In addition, follow the instructions that appear on the screen.
» page
266.
Fig. 293
Key to be stored / example of
the display: a tyre pressure
change at the front left is indica-
ted
on page 243 first.
interface» fig.
293.
A message on the screen informs about the storage of the tyre pressure val-
ues.
Notice
When the warning light
appears in the instrument cluster, the affected tyre
can be displayed on the infotainment system
» fig.
293.
243
Assist systems
Advertisement
Table of Contents
