Before You Begin - Oregon Scientific RRM-112A User Manual

The clock and radio have separate low-battery indicators. Change
the batteries accordingly when the respective indicator lights up.
An AC Power Adapter is included. To connect it, plug it into the
power adapter connector and a wall socket.

BEFORE YOU BEGIN

The RRM-112A is designed for table stand or wall mount.
Table Stand
Place the RRM-112A on a flat, sturdy surface. You can adjust the
display angle of the LCD by lifting up the LCD panel.
Note: The power adaptor supplies
power only to the radio. The clock
operates on batteries.
Note: Unlock the latch on the back of the unit before lifting up
the LCD panel.
Wall Mount
A wall mounting guide is included. Place the mounting guide on the
wall where the RRM-112A is to be hanged. After making appropriate
markings install two mounting screws onto the wall. Hang the
RRM-112A on the mounting screws.
Note: For wall mounting the unit should be kept flat by locking the
latch on the back of the unit.
3