Switch Clock Display; Hourly Chime; Alarm; View Alarm Settings - Oregon Scientific BAR289 User Manual

You can select 1 of the 5 following languages:
SYMBOL

SWITCH CLOCK DISPLAY

Press MODE / LIGHT to toggle between the following
clock displays:
• RF time with hour-offset time (HH:MM)
• Day of the week
• Calendar
• RF time without offset
• Time-zone hour-offset setting
BAR289 ENG R5
All manuals and user guides at all-guides.com
LANGUAGE
English
German
French
Italian
Spanish
7
Each display will be backlit for 5 seconds and will return
to the main screen display after 10 seconds.

HOURLY CHIME

The hourly chime function when set to ON will beep once
at the beginning of every hour, and the chime icon
will show on the display.

ALARM

This product is equipped with a 2-minute crescendo
alarm.

VIEW ALARM SETTINGS

Press ALARM. The alarm time and status will show in
the Clock Area.

SET ALARM

1. Press ALARM to switch to alarm display.
2. Press and hold ALARM again, for 2 seconds. The
alarm settings will blink.
3. Select the hour and minute. Press UP or DOWN to
change settings. Press ALARM to confirm. The
alarm will be activated automatically.

ACTIVATE ALARM

Press ALARM twice to start toggling between alarm ON
and alarm OFF.
shows in the Clock / Alarm Area when the alarm is
activated.
NOTE Press MODE, or wait 1 minute to return to clock
display.

SILENCE ALARM

When the alarm time is reached, the crescendo alarm
will sound for 2 minutes and the backlight will turn on for
5 seconds. To silence the alarm:
• Press
silence it for 8 minutes.
OR
• Press any key on the main unit or remote control
except
activate it again after 24 hours.
If no button is pressed, the alarm will automatically
silence after 2 minutes.
7
7/28/04, 12:35 PM
on the remote control to
to mute the alarm and