Specifications; Note On Compliance - Oregon Scientific JTR-168LR User Manual

SPECIFICATIONS

Temperature Measurement
Main Unit
Indoor Temperature measurement
Proposed operating range
Temperature resolution
Diagram temperature scale
Ice Warning function
(Channel-1 Remote Sensor)
Remote Sensor Unit
Proposed operating range
Temperature resolution
RF Transmission Frequency : 433 MHz
No. of Remote unit
RF Transmission Range
Temperature sensing cycle
User selectable C and F
Power
Main unit
Remote unit
: -5.0 C to +50.0 C
(23.0 F to 122.0 F)
: 0.1 C (0.2 F)
: -7 C to 7 C
: -2 C to +3 C
(28.4 F to 37.4 F)
: -20.0 C to +60.0 C
(-4.0 F to +140.0 F)
: 0.1 C (0.2 F)
: Maximum of 3
: 100 meters
: 30 seconds
: use 2 pcs UM-3 or"AA" 1.5V
alkaline battery
: use 2 pcs UM-4 or "AAA" 1.5V
alkaline battery
Weight
Main unit
Remote sensing unit
Dimension
Main unit
Remote sensing unit

NOTE ON COMPLIANCE

Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC :
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
9
: 200 g (without battery)
: 87 g (without battery)
: 153 (L) x 117 (W) x 23.5 (D) mm
: 152 (L) x 48 (W) x 23 (D) mm