Physical Specifications - Emerson Rosemount 1208C Reference Manual

Reference Manual
00809-0200-7062
Volume flow calculations
• Linearization table
• Parshall flume
• Khafagi-Venturi flume
A.2.4 Process pressure
-15 to 43.5 psig (-1 to 3 bar)
Note
The PE100 flanges must be used only in non-pressurized applications.
A.2.5 Temperature limits
Process temperature
-40 to 176 °F (-40 to 80 °C)
Ambient temperature
-40 to 176 °F (-40 to 80 °C)
Storage temperature
-40 °F to 194 °F (-40 °C to 90 °C)
A.3

Physical specifications

A.3.1 Material selection
Emerson provides a variety of Rosemount products with various product options and
configurations, including materials of construction that can be expected to perform well
in a wide range of applications. The Rosemount product information presented is intended
as a guide for the purchaser to make an appropriate selection for the application. It is the
purchaser's sole responsibility to make a careful analysis of all process parameters (such
as all chemical components, temperature, pressure, flow rate, abrasives, contaminants,
etc.), when specifying product, materials, options, and components for the particular
application. Emerson is not in a position to evaluate or guarantee the compatibility of
the process fluid or other process parameters with the product, options, configuration, or
materials of construction selected.
A.3.2 Housing and enclosure
Process connection
NPT 1½-in. or ISO 228/1-G1½-in. thread with a choice of different brackets, adapters, and
flanges
Reference Manual
Specifications and reference data
March 2023
71