Bmc Network Configuration - ASROCK B650D4U User Manual

3.5.1 BMC Network Configuration

Bonding Setting
Use this item to enable or disable bonding. If you want to enable bonding, please enable all
Lan channels first.
BMC Out of Band Access
Use this item to enable or disable BMC Out of band Access.
Lan channel (Failover)
Manual Setting IPMI LAN
If [No] is selected, the IP address is assigned by DHCP. If you prefer using a static IP
address, toggle to [Yes], and the changes take effect after the system reboots. The default
value is [No].
Configuration Address Source
Select to configure BMC network parameters statically or dynamically(by BIOS or BMC).
Configuration options: [Static] and [DHCP].
Static: Manually enter the IP Address, Subnet Mask and Gateway Address in the BIOS for
BMC LAN channel configuration.
DHCP: IP address, Subnet Mask and Gateway Address are automatically assigned by the
network's DHCP server.
B650D4U
B650D4U-2L2T
B650D4U-2L2T/BCM
83