Security - ASROCK B650D4U User Manual

3.4 Security

In this section, you may set or change the supervisor/user password for the system. For the
user password, you may also clear it.
Supervisor Password
Set or change the password for the administrator account. Only the administrator has
authority to change the settings in the UEFI Setup Utility. Leave it blank and press
[Enter] to remove the password.
User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press [Enter] to remove the
password.
Secure Boot
Use this to Enable/Disable Secure Boot Control. The default value is [Enabled]. Enable
to support Windows Server 2012 R2 or later versions Secure Boot.
Secure Boot Mode
Secure Boot mode options: Standard/Custom. In Custom mode, Secure Boot Policy
variables can be configured without authentication.
B650D4U
B650D4U-2L2T
B650D4U-2L2T/BCM
75