Table of Contents
Advertisement
3.5.3 BMC Tools
KCS Control
Select this KCS interface state after POST end. If [Enabled] us selected, the BMC will
remain KCS interface after POST stage. If [Disabled] is selected, the BMC will disable KCS
interface after POST stage.
Restore AC Power Loss
Select the power state after a power failure. If [Power Off] is selected, the power will remain
off when the power recovers. If [Power On] is selected, the system will start to boot up
when the power recovers.
Load BMC Default Settings
Use this item to Load BMC Default Settings
86
Advertisement
Table of Contents
