ASROCK PHANTOM GAMING B650I LIGHTNING WiFi User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. PHANTOM GAMING B650I LIGHTNING WiFi
  6. User manual
ASROCK PHANTOM GAMING B650I LIGHTNING WiFi User Manual

ASROCK PHANTOM GAMING B650I LIGHTNING WiFi User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for ASROCK PHANTOM GAMING B650I LIGHTNING WiFi

Summary of Contents for ASROCK PHANTOM GAMING B650I LIGHTNING WiFi

  • Page 2 Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp ASRock Incorporation e-mail: info@asrock.com.tw...

  • Page 3: Table Of Contents

    Chapter 1 Introduction Package Contents Specifications Motherboard Layout I/O Panel Block Diagram 802.11ax Wi-Fi 6E Module and ASRock WiFi 2.4/5/6 GHz Antennas Chapter 2 Installation Installing the CPU Installing the CPU Fan and Heatsink Installing Memory Modules (DIMM) Connecting the Front Panel Header...
  • Page 4 2.14 M.2 SSD Module Installation Guide (M2_1) 2.15 M.2 SSD Module Installation Guide (M2_2)

  • Page 5: Chapter 1 Introduction

    ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.

  • Page 6: Specifications

    • Supports DDR5 non-ECC, un-buffered memory up to 7200+(OC)* • Max. capacity of system memory: 96GB • Supports Extreme Memory Profile (XMP) and EXTended Profiles for Overclocking (EXPO) memory modules * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) Expansion CPU: Slot • 1 x PCIe 4.0 x16 Slot (PCIE1), supports x16 mode*...
  • Page 7 B650I Lightning WiFi • 2.5 Gigabit LAN 10/100/1000/2500 Mb/s • Dragon RTL8125BG • Supports Phantom Gaming LAN Software - Smart Auto Adjust Bandwidth Control - Visual User Friendly UI - Visual Network Usage Statistics - Optimized Default Setting for Game, Browser, and Streaming Modes - User Customized Priority Control Wireless...
  • Page 8 Rear Panel • 2 x Antenna Ports • 1 x HDMI Port • 3 x USB 3.2 Gen2 Type-A Ports (10 Gb/s) (USB32_23 are Lightning Gaming Ports.) • 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s) • 4 x USB 2.0 Ports • 1 x RJ-45 LAN Port • 1 x BIOS Flashback Button • HD Audio Jacks: Line in / Front Speaker / Microphone...
  • Page 9 • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools.

  • Page 10: Motherboard Layout

    1.3 Motherboard Layout Top Side View ADDR_LED1 ADDR_LED2 CPU_FAN1/WP CPU_FAN2/WP ATX12V1 USB 3.2 Gen2 Top: T: USB32_1 B: USB32_TC1 USB 3.2 Gen2 T: USB32_3 HDMI1 B: USB32_2 USB 2.0: USB_1234 BIOS BIOS _FB1 USB_5_6 PANEL1 M2_WIFI_1 USB32_TC2 B650 AUDIO CODEC PCIE1 CLRCMOS1 17 16...
  • Page 11 B650I Lightning WiFi Back Side View...
  • Page 12 No. Description ATX 12V Power Connector (ATX12V1) Addressable LED Header (ADDR_LED1) Addressable LED Header (ADDR_LED2) CPU/Water Pump Fan Connector (CPU_FAN1/WP) CPU/Water Pump Fan Connector (CPU_FAN2/WP) 2 x 288-pin DDR5 DIMM Slots (DDR5_A1, DDR5_B1) ATX Power Connector (ATXPWR1) SATA3 Connector (SATA3_2) SATA3 Connector (SATA3_1) USB 3.2 Gen1 Header (USB32_4_5) System Panel Header (PANEL1)

  • Page 13: I/O Panel

    B650I Lightning WiFi 1.4 I/O Panel No. Description No. Description 2.5G LAN RJ-45 Port* Microphone (Pink)*** USB 3.2 Gen2 Type-A Ports (USB32_23)** USB 2.0 Ports (USB_1234) Line In (Light Blue)*** HDMI Port Front Speaker (Lime)*** USB 3.2 Gen2 Type-A Port (USB32_1) Antenna Ports USB 3.2 Gen2 Type-C Port (USB32_TC1) BIOS Flashback Button...
  • Page 14 *** Function of the Audio Ports in 7.1-channel Configuration: Port Function Light Blue (Rear panel) Rear Speaker Out Lime (Rear panel) Front Speaker Out Pink (Rear panel) Central /Subwoofer Speaker Out Lime (Front panel) Side Speaker Out...

  • Page 15: Block Diagram

    B650I Lightning WiFi 1.5 Block Diagram...

  • Page 16: 802.11Ax Wi-Fi 6E Module And Asrock Wifi 2.4/5/6 Ghz Antennas

    1.6 802.11ax Wi-Fi 6E Module and ASRock WiFi 2.4/5/6 GHz Antennas 802.11ax Wi-Fi 6E + BT Module This motherboard comes with an exclusive 802.11 a/b/g/n/ac/ax Wi-Fi 6E + BT v5.2 module that offers support for 802.11 a/b/g/n/ac/ax Wi-Fi 6E connectivity standards and Bluetooth v5.2.
  • Page 17 B650I Lightning WiFi WiFi Antennas Installation Guide Step 1 Prepare the WiFi 2.4/5/6 GHz Antennas that come with the package. Step 2 Connect the two WiFi 2.4/5/6 GHz Antennas to the antenna connectors. Turn the antenna clockwise until it is securely connected. Step 3 Set the WiFi 2.4/5/6 GHz Antenna as shown in the illustration.

  • Page 18: Chapter 2 Installation

    Chapter 2 Installation This is a Mini-ITX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.

  • Page 19: Installing The Cpu

    B650I Lightning WiFi 2.1 Installing the CPU 1. Before you insert the 1718-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 20 Carefully place the CPU in as flat as possible. Do not drop it.
  • Page 21 B650I Lightning WiFi Make sure the CPU is aligned with the socket before locking it into place. Make sure the black cover plate is always in place until it pops off when closing the socket lever. Please save the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.

  • Page 22: Installing The Cpu Fan And Heatsink

    2.2 Installing the CPU Fan and Heatsink After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
  • Page 23 B650I Lightning WiFi...
  • Page 24 Installing the CPU Cooler (Type 2)
  • Page 25 B650I Lightning WiFi...
  • Page 26 +12V *The illustrations shown here are for reference purposes only and may not exactly match the model you purchase.
  • Page 27 B650I Lightning WiFi Installing the CPU Cooler (Type 3)
  • Page 29 B650I Lightning WiFi...
  • Page 30 +12V Please note that only one cable should be used at a time in this step. If you select RGB_LED1, please install ASRock utility "ASRock Polychrome SYNC". If you select USB connector, please install AMD utility "SR3 Settings Software". *The illustrations shown here are for reference purposes only and may not exactly match...

  • Page 31: Installing Memory Modules (Dimm)

    B650I Lightning WiFi 2.3 Installing Memory Modules (DIMM) This motherboard provides two 288-pin DDR5 (Double Data Rate 5) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR5 DIMM pairs. 2.

  • Page 33: Connecting The Front Panel Header

    B650I Lightning WiFi 2.4 Connecting the Front Panel Header Power SW (-) RESET SW (+) Power SW (+) RESET SW (-) Power LED (-) HDD LED (-) Power LED (+) HDD LED (+) PANEL1...

  • Page 34: Installing The Motherboard

    2.5 Installing the Motherboard...

  • Page 35: Installing Sata Drives

    B650I Lightning WiFi 2.6 Installing SATA Drives 2.6 Installing SATA Drives Optical Drive SATA Drive SATA Data Cable...
  • Page 36 SATA Power Connector SATA Data Connector...

  • Page 37: Installing A Graphics Card

    B650I Lightning WiFi 2.7 Installing a Graphics Card CLICK!
  • Page 38 Expansion Slot (PCIe Slot) There is 1 PCI Express slot on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

  • Page 39: Connecting Peripheral Devices

    B650I Lightning WiFi 2.8 Connecting Peripheral Devices...

  • Page 40: Connecting The Power Connectors

    2.9 Connecting the Power Connectors...

  • Page 41: Power On

    B650I Lightning WiFi 2.10 Power On...

  • Page 42: Jumpers Setup

    2.11 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper (CLRCMOS1) (see p.6, No. 14) CLRCMOS1 allows you to clear the data in CMOS.

  • Page 43: Onboard Headers And Connectors

    B650I Lightning WiFi 2.12 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header (9-pin PANEL1) (see p.6, No.
  • Page 44 Please refer to the table below for PLED (System Power LED) indications. Status Description Blinking (2Hz) Booting into system Booting completed Blinking till BFG DRAM overclocking failed Booting without DRAM Blinking (1Hz) Entering S3 sleep mode Serial ATA3 Connectors (SATA3_1) (see p.6, No. 9) (SATA3_2) (see p.6, No.
  • Page 45 B650I Lightning WiFi USB 2.0 Header (9-pin USB_5_6) (see p.6, No. 12) There is one header on this motherboard. This USB 2.0 header can support two ports. USB_5_6 DUMMY USB_PWR USB_PWR USB 3.2 Gen1 Header (19-pin USB32_4_5) (see p.6, No. 10) There is one header on this motherboard.
  • Page 46 Front Panel Type C USB 3.2 Gen1 Header (20-pin USB32_TC2) (see p.6, No. 13) There is one Front Panel Type C USB 3.2 Gen1 Header on this motherboard. This header is used for connecting a USB 3.2 Gen1 module for additional USB 3.2 Gen1 ports.
  • Page 47 B650I Lightning WiFi Chassis Speaker Header (4-pin SPEAKER1) (see p.6, No. 17) Please connect the chassis speaker to this header. SPEAKER1 SPEAKER DUMMY DUMMY Chassis/Water Pump Fan Connector (4-pin CHA_FAN1/WP) (see p.6, No. 15) This motherboard provides a 4-Pin water cooling chassis fan connectors. If you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3.
  • Page 48 CPU/Water Pump Fan Connectors (4-pin CPU_FAN1/WP) (see p.6, No. 4) (4-pin CPU_FAN2/WP) (see p.6, No. 5) This motherboard provides two 4-Pin water cooling CPU fan connectors. If you plan to connect a 3-Pin CPU water cooler fan, please connect it to Pin 1-3. CPU_FAN2/WP FAN_VOLTAGE CPU_F...
  • Page 49 B650I Lightning WiFi ATX Power Connector (24-pin ATXPWR1) (see p.6, No. 7) This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. ATXPWR1 ATX 12V Power Connector (8-pin ATX12V1) (see p.6, No.
  • Page 50 Addressable LED Headers (3-pin ADDR_LED1) (see p.6, No. 2) (3-pin ADDR_LED2) (see p.6, No. 3) These headers are used to connect Addressable LED extension cables which allow users to choose from various LED lighting effects. Caution: Never install the Addressable LED cable in the wrong orientation; otherwise, the cable may be damaged.

  • Page 51: Smart Button

    B650I Lightning WiFi 2.13 Smart Button The motherboard has a smart button: BIOS Flashback Button, allowing users to flash the BIOS. BIOS Flashback Button (BIOS_FB1) (see p.9, No. 6) BIOS Flashback Button allows users to flash the BIOS. BIOS_FB1 USB BIOS Flashback port...
  • Page 52 2.14 M.2 SSD Module Installation Guide (M2_1) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Blazing M.2 Socket (M2_1, Key M) supports type 2280 PCIe Gen5x4 (128 Gb/s) mode. Installing the M.2 SSD Module Step 1 Prepare a M.2 SSD module and the...
  • Page 53 B650I Lightning WiFi Step 3 Before installing a M.2 SSD module, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD module. Step 4 Align and gently insert the M.2 SSD module into the M.2 slot.
  • Page 54 Step 5 Before securing the M.2 heatsink, make sure to align the notch on the SSD to the standoff on the motherboard; otherwise, the SSD module may be damaged. Correct Installation: The SSD's PCB is in proper place, and the M.2 heatsink can be screwed in. Incorrect Installation: The SSD's PCB sits between M.2 heatsink and standoff.
  • Page 55 M.2 connector (3). *Please do not overtighten the screw as this might damage the module and M.2 heatsink. For the latest updates of M.2 SSD module support list, please visit our website for details: http://www.asrock.com...
  • Page 56 2.15 M.2 SSD Module Installation Guide (M2_2) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Socket (M2_2, Key M) supports type 2280 PCIe Gen4x4 (64 Gb/s) mode. Installing the M.2 SSD Module Step 1 Prepare a M.2 SSD module and the...
  • Page 57 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. NUT2 NUT1 For the latest updates of M.2 SSD module support list, please visit our website for details: http://www.asrock.com...
  • Page 58 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 59 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Page 60 ASRock follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASRock product is in line with global environmental regulations. In addition, ASRock disclose the relevant information based on regulation requirements.
  • Page 61 Operations in the 5.15-5.35/6GHz band are restricted to indoor usage only. Radio transmit power per transceiver type Function Frequency Maximum Output Power (EIRP) 2400-2483.5 MHz 18.5 + / -1.5 dbm 5150-5250 MHz 21.5 + / -1.5 dbm 18.5 + / -1.5 dbm (no TPC) 5250-5350 MHz 21.5 + / -1.5 dbm (TPC) WiFi...

This manual is also suitable for:

Phantom gaming b650i lighting wifi

Table of Contents