Bmc Network Configuration - ASROCK GENOAD24QM3-2L2T/BCM User Manual

3.5.1 BMC Network Configuration

Bonding Setting
Use this item to enable or disable bonding, Set this item to enable bonding please enable all
Lan channel first.
Bond0 Enable Setting
Show the Bond0 status is enabled or disabled.
Manual Setting IPMI LAN
If [No] is selected, the IP address is assigned by DHCP. If you prefer using a static IP
address, toggle to [Yes], and the changes take effect after the system reboots. The default
value is [No].
Configuration Address Source
Select to configure BMC network parameters statically or dynamically(by BIOS or BMC).
Configuration options: [Static] and [DHCP].
Static: Manually enter the IP Address, Subnet Mask and Gateway Address in the BIOS for
BMC LAN channel configuration.
DHCP: IP address, Subnet Mask and Gateway Address are automatically assigned by the
network's DHCP server.
When [DHCP] or [Static] is selected, do NOT modify the BMC network settings on the
IPMI web page.
GENOAD24QM3-2L2T/BCM
81