Table of Contents
Advertisement
Getting Started
See the Important Safety and Product Information
guide in the product box for product warnings and
other important information.
1
Mount the device
2
Register the device
3
Check for updates.
• Software updates
• Free map update
Connecting the Device to Vehicle
Power
This product contains a lithium-ion battery. To
prevent the possibility of personal injury or product
damage caused by battery exposure to extreme
heat, remove the device from the vehicle when
exiting or store it out of direct sunlight.
Before you use your device on battery power, you
should charge it.
1
Plug the vehicle power cable
port on the mount
2
Snap the mount onto the suction cup
3
Press the suction cup to the windshield.
4
While pressing, flip the lever
the windshield.
5
Fit the bottom of your device into the mount.
nüvi 2585TV Owner's Manual
WARNING
(page
5).
(page
6).
(page
6).
(page
6).
WARNING
into the USB
➊
.
➋
➌
back toward
➍
6
Tilt your device back until it snaps into place.
7
Plug the other end of the vehicle power cable
into a power outlet in your vehicle.
8
If necessary, connect the external antenna
to the traffic receiver and secure it to the
windshield using the suction cups.
About myDashboard
Use myDashboard to register your device, check
for software and map updates, access product
manuals and support, and more.
Setting Up myDashboard
1
Connect the USB cable
the device
.
2
Connect the USB cable to the USB port on
your computer.
➋
➊
to the USB port on
➊
.
➋
➋
➊
➌
➍
5
Advertisement
Table of Contents
