Connecting The Cables - Epson Equity 4 User Manual

To insert a hard disk drive, align the guiderails on each side
7.
of the drive with the notches on each side of the drive bay
and slide the drive all the way into the bay, as shown
below. Secure the guiderails to the computer case with the
two retaining screws.
notch
guiderail

Connecting the Cables

To connect the drive to the computer, you need to connect two
cables: a drive ribbon cable and a power supply cable. The
steps below describe how to connect these cables to the drive.
If you are installing a diskette drive, follow step 1 and then skip
to step 3. If you are installing a hard disk drive, start with step 2.
Installing and Removing Drives
3-24