Keyboard Problems - Epson Equity 4 User Manual

9. To disable the password, highlight the security option,
then press [+1 or [-1 to change the setting to
Chapter 2 of the
10. Check all the settings in SETUP and change any that do not
match your system configuration. (Resetting J7 erased all
your previous SETUP settings and restored the factory
default settings.)
11. Save your settings as you exit SETUP. (See Chapter 2 of the
Guide for instructions.) The computer reboots.
Setup
If you disabled password security, you do not see the
password prompt and can access your computer immediately.
If you set a new password, you see the password prompt.
Enter your password as described in Chapter 1.

Keyboard Problems

If you have trouble with the keyboard, check the following:
1. If the screen displays a keyboard error message when you
turn on or reset the computer, make sure the keyboard is
securely connected to the correct port. See "Connecting the
Keyboard" in Chapter 1 of the
2. If nothing happens when you type on the keyboard, see
"The Computer Does Not Respond," above.
3. If the cursor keys on the numeric keypad do not work
properly, the num lock function may be on. When num lock
is on, the keys on the numeric keypad work only as
numbers. If the
the keyboard is lit, press thmlodr to turn off the function.
6-12 Troubleshooting
for more information.)
Setup Guide
Num Lock light in the upper right comer of
Disable. (See
for instructions.
Setup Guide