Table of Contents
Advertisement
3.
If you are installing a drive in the lower bay, remove the two
retaining screws securing the drive bay cover to the front of
the computer and remove the cover. Store it in a safe place
and save the screws to use later to secure the drive.
4.
If you are installing a 5.25-inch diskette drive, hold it so that
the diskette release latch is above the diskette slot. If you
are installing a 3.5-inch diskette drive or a 5.25-inch
combination drive, hold it so that the diskette release
button(s) are on the right and the drive light is on the left.
If you are installing a hard disk drive, hold it so that the
component side faces down, and skip to step 7.
5-18
Installing and Removing Drives
Advertisement
Table of Contents
