Chapter 2
Running the SETUT Program
The first time you use your computer, you may need to run the
SETUP program. If your system was configured for you, you
may want to check the settings or adjust the date and time. If
you change your configuration, you may need to run it again.
SETUP lets you verify or change the following:
0 Current date and time
0
Type of diskette drive(s) installed
Type of hard disk drive(s) installed
0
Type of video display adapter you are using
0
0 Processor speed
0 System booting sequence
0 Diskette drive seek test
0 Virus protection
0 S y s t e m m e m o r y
0 Coprocessor support
0 S h a d o w o p t i o n s
0 Keyboard options
0 Peripherals options
0 Password options.
Running the SETUP Program
2-1