Table of Contents
Advertisement
Post-SETUP Procedures
If you have just run SETUP for the first time and your system
has not been configured, you now need to install the operating
system on your computer. See your operating system manual
for instructions.
After you have installed your operating system, you can install
any software you plan to use. See your application program
manuals for instructions.
The VGA Utilities diskettes contain special drivers to take
advantage of the local bus video capabilities of your system
and enhance the display capabilities of your built-in VGA
adapter with certain applications. If you want to install these
drivers, see the README file called VGADRV.TXT in the root
directory of the VGA Utilities 1 diskette. To print this file, enter
the following command at the DOS prompt:
COPY A:VGADRV.TXT LPTl
If your computer came pre-configured, the README file and
the drivers are on the hard disk drive. You can access the
README file by loading Windows and clicking on the VGA
Utilities group icon. Then select the README file icon.
2 - 1 6
Running the SETUP Program
Advertisement
Table of Contents
