Epson Endeavor L User Manual page 101

6. If you are installing a diskette drive in the lower bay, you
need to remove the faceplate on the front panel of the
computer's cover because it covers this bay. Turn the cover
over and locate the faceplate. Remove the screws securing
the faceplate to the inside of the computer's cover and
remove the faceplate, as shown in the following illustration.
Store the faceplate and screws in a safe place; you may want
to install it again later. Then go to "Connecting the Cables"
on
page 5-21.
5-20
Installing and Removing Drives