Table of Contents
Advertisement
4.
To turn on the computer, press the power button on the right
side of the front panel.
power
(SPEED)
indicator
The power indicator on the left side of the front panel lights
up. After a few seconds, the screen displays a count of the
system memory, and then the computer performs a
power-on diagnostics routine to make sure everything is
working correctly.
5.
If necessary, use the controls on your monitor to adjust the
brightness and contrast until you can easily see the
characters on the screen. If your monitor has horizontal and
vertical hold controls, you may need to use them to
stabilize the display.
6.
The screen displays the following prompt:
P r e s s < D E L > I f y o u w a n t t o r u n S E T U P
Do not press any key yet;you just want to make sure the
computer is working. This prompt appears every time you
turn on your computer so you can run SETUP if necessary
After a few seconds, the prompt disappears.
hard drive
access
indicator
diskette
drive
Setting Up Your System
power
button
1 - 9
Advertisement
Table of Contents
