Procedure Job Aid: Sfp Models With Ddi Support - Nortel 5500 Series Installation Manual

Table 5
SFP models with DDI capability
Model
1000BASE-SX
1000BASE-LX
For specifications for these SFPs, see

Procedure job aid: SFP models with DDI support

Any Digital Diagnostic Indicating (DDI) SFP can be used in any Ethernet
Routing Switch module that supports SFPs. The optical functions of the
SFP are supported. Access to the DDI information will be provided in
a future release.
The SFPs described in this section are all RoHS -E6 compliant.
The following table lists and describes the Nortel SFP models with DDI
capability. All these SFPs use LC connectors.
Table 6
SFP models with DDI capability
Model
1000BASE-T (RJ-45)
1000BASE-BX (LC type)
For specifications for these SFPs, see
Procedure job aid: SFP models with DDI support
Any Digital Diagnostic Indicating (DDI) SFP can be used in any Ethernet
Routing Switch module that supports SFPs. The optical functions of the
SFP are supported. Access to the DDI information will be provided in
a future release.
The SFPs described in this section are all RoHS -E6 compliant.
The following table lists and describes the Nortel SFP models with DDI
capability. All the optical SFPs use LC connectors.
Copyright © 2007–2010, Nortel Networks
.
Product number
AA1419048-E6
AA1419049-E6
Product number
AA1419043-E6
AA1419069-E6,
AA1419070-E6
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs and XFPs
NN47200-302 01.04 Standard
5.1 27 January 2010
Selecting an SFP 29
Description
850 nm, up to 275 or 550 m
1310 nm, up to 10 km
"SFP specifications" (page
Description
CAT5 UTP, up to 100 m. Note that
because the 1000BASE-T device is
all electrical, there is no need for DDI
support.
Bidirectional 1310 nm and 1490 nm, up
to 10 km
"SFP specifications" (page
37).
37).