Procedure Job Aid: Sfp Models With Ddi Support - Nortel 5500 Series Installation Manual

28 Small form factor pluggable transceivers
Model and connector
1000BASE-SX (MT-RJ)
1000BASE-LX (LC)
1000BASE-XD CWDM (LC)
1000BASE-ZX CWDM (LC)
Table 4
SFP models
Model and connector
1000BASE-SX (LC)
1000BASE-SX (MT-RJ)
1000BASE-LX (LC)
1000BASE-XD CWDM (LC)
1000BASE-ZX CWDM (LC)
100BASE-FX (LC)
T1 (RJ-48C)
For specifications for these SFPs, see

Procedure job aid: SFP models with DDI support

Any Digital Diagnostic Indicating (DDI) SFP can be used in any Secure
Router 4134 module that supports SFPs. The optical functions of the SFP
are supported. Access to the DDI information will be provided in a future
release.
The following table lists and describes the Nortel SFP models with DDI
capability. All these SFPs use LC connectors.
Copyright © 2007–2010, Nortel Networks
.
Product number
AA1419014-E5
AA1419015-E5
AA1419025-E5 to
AA1419032-E5
AA1419033-E5 to
AA1419040-E5
Product number
AA1419013-E5
AA1419014-E5
AA1419015-E5
AA1419025-E5 to
AA1419032-E5
AA1419033-E5 to
AA1419040-E5
AA1419074-E6
AA1419075-E6
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs and XFPs
NN47200-302 01.04 Standard
5.1 27 January 2010
Description
850 nm, up to 275 or 550 m
1310 nm, up to 10 km
1470 nm to 1610 nm, up to 40 km
1470 nm to 1610 nm, up to 70 km
Description
850 (nm), up to 275 or 550 m
850 nm, up to 275 or 550 m
1310 nm, up to 10 km
1470 nm to 1610 nm, up to 40 km
1470 nm to 1610 nm, up to 70 km
1310 nanometers (nm), up to 2 km
Supported by the 4526FX, 4526T,
4526T-PWR, 4550T, 4550T-PWR
and 4524GT
1.544 Mbit/s Fast Ethernet to T1
remote bridge. Supported by the
4526FX, 4526T, 4526T-PWR,
4550T, 4550T-PWR and 4524GT
"SFP specifications" (page 37).