Installation
3
The magnets attached to the rear cover can be used to fix the device to the indoor unit. If the device cannot be fixed properly
with the magnets, use the supplied screws to fix to the unit or a nearby structure.
•
Before attaching the rear cover, ensure there are gaps of at least 3/8" along the top and the left and right sides of
the device and a gap of at least 2" along the bottom.
4
Insert the wires into the device by passing them through the opening created in step 2.
5
Use the supplied labels to label the wires before connecting to the corresponding terminals.
Insert the wires this way
10 English
3/8" or more
3/8" or more
Wire
Magnet (at 4 spots)
3/8" or more
Screw hole (at 4 spots)
2" or more