Resetting The Filter Saturation Indicator For The Charcoal Filters; Disposing Of Charcoal Filters - Miele DAS 4940 Operating And Installation Instructions

Cleaning and care
Installing/replacing the charcoal
filters
The slots for the charcoal filters are
located above the grease filters.
 Remove the lid. It is held in place by
magnets.
 Take the charcoal filters out of their
packaging.
 Insert the charcoal filters into the
slots as far as they will go.
 Replace the lid.
When to change the OdorFree
Charcoal Filter
Replace the charcoal filters when they
no longer absorb kitchen odors
effectively, and at least every 6 months.
The filter saturation indicator reminds
you to regularly replace the charcoal
filters by illuminating the charcoal filter
symbol .
38
Resetting the filter saturation
indicator for the charcoal filters
After changing the charcoal filters, the
filter saturation indicator must be reset.
 To do this, press the filter saturation
indicator  twice with the blower
turned on and hold it for approx.
3 seconds until 1 is the only indicator
flashing.
The charcoal filter symbol  will go
out.
If you want to replace the charcoal
filters before the full operating time
elapses:
 Press the filter saturation
indicator  twice and hold it for
approx. 6 seconds until 1 is the only
indicator flashing.

Disposing of charcoal filters

 Used charcoal filters can be disposed
of with normal household waste.