Resetting The Filter Saturation Indicator For The Charcoal Filters; Disposing Of Charcoal Filters - Miele DA 5428 W Operating And Installation Instructions

Table of Contents

Advertisement

Cleaning and care
When to change the OdorFree
Charcoal Filter
 Replace the charcoal filter when it no
longer absorbs kitchen odors
effectively.
It should be replaced at least every 6
months.
The filter saturation indicator reminds
you to regularly replace the charcoal
filter by illuminating the charcoal filter
symbol .
Resetting the filter saturation
indicator for the charcoal filters
After changing the charcoal filters, the
filter saturation indicator must be reset.
 To do this, press the filter saturation
indicator  twice with the blower
turned on and hold it for approx.
3 seconds until 1 is the only indicator
flashing.
The charcoal filter symbol  will go
out.
If you want to replace the charcoal filter
before the full operating time elapses:
 Press the filter saturation
indicator  twice and hold it for
approx. 6 seconds until 1 is the only
indicator flashing.

Disposing of charcoal filters

 Used charcoal filters can be disposed
of with normal household waste.
32
Charcoal filters are available to order via
the Miele Web Store (see end of this
booklet for contact details), or from
your Miele dealer.
The charcoal filters are listed under
"Technical data" at the back of this
booklet.

Advertisement

Table of Contents
loading

Table of Contents