2. Remove the
base
cover.
About this task
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, carefully pry the memory-module retention clips away from the memory module until the memory
module pops-up.
2. Slide the memory module at an angle and remove it from the memory-module slot on the system board.
3. Repeat step 1 and 2 for the second memory module, if installed.
Installing the memory module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the memory module and provide a visual representation of the installation
procedure.
44
Removing and installing Customer Replaceable Units (CRUs)