Table of Contents
Advertisement
2. Install the
display hinge
3. Install the
display
assembly.
4. Install the
wireless
card.
5. Install the
M.2 2230 solid-state drive
6. Install the
base
cover.
7. Follow the procedure in
Display panel
Removing the display panel
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
M.2 2230 solid-state drive
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
display hinge
7. Remove the
display
bezel.
8. Remove the
display
hinges.
About this task
NOTE:
This procedure applies only to computers with a plastic chassis.
The following images indicate the location of the display panel and provide a visual representation of the removal procedure.
caps.
or the
M.2 2280 solid-state
After working inside your
Before working inside your
or the
M.2 2280 solid-state
caps.
drive, whichever applicable.
computer.
computer.
drive, whichever applicable.
Removing and installing Field Replaceable Units (FRUs)
103
Advertisement
Table of Contents
