Dell Vostro 14 3430 Owner's Manual page 136

Table 36. System setup options — Security menu (continued)
Security
Table 37. System setup options — Passwords menu
Passwords
Admin Password
System Password
M.2 PCIe SSD-0
Table 38. System setup options — Update, Recovery menu
Update, Recovery
SupportAssist OS Recovery
BIOSConnect
Dell Auto OS Recovery Threshold
Table 39. System setup options — System Management menu
System Management
Service Tag
Asset Tag
Diagnostics
OS Agent Requests
Table 40. System setup options — Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings
Warning and Errors
136 BIOS setup
By default, the option is disabled.
Enables the user to set, change, or delete the administrator (admin) password.
The administrator password enables several security features.
Enables the user to set, change, or delete the system password. The system
password prevents the computer from booting to an operating system without
entering the correct password.
Enables the user to set, change, or delete the M.2 PCIe SSD-0 password.
Enables or disables the boot flow for SupportAssist OS Recovery tool, in the
event of certain system error.
By default, the option is enabled.
Enables or disables cloud Service OS recovery if the main OS fails to boot
within the number of failures equal or greater than the value specified by
Dell Auto OS Recovery Threshold, and local Service does not boot, or is not
installed.
By default, the option is enabled.
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery tool.
By default, the Dell Auto OS Recovery Threshold value is set to 2.
Displays the Service Tag of the computer.
Creates a system Asset Tag that can be used by an IT administrator to
uniquely identify a particular system. Once set in BIOS, the Asset Tag cannot
be changed.
Enables or disables the Dell OS Agent to schedule onboard diagnostics on a
subsequent boot. Enabling this option helps assist in prevention and resolution
of hardware related issues.
By default, the option is enabled.
Enables or disables the computer to display adapter warning messages when
adapters with too little power capacity are detected.
By default, the option is enabled.
Enables or disables the action to be taken when a warning or error is
encountered.