How To Use Remote Controller; Cooling/Heating/Fan Only Operation; Dry Operation - Toshiba Carrier MMK-UP0071HP-UL Owner's Manual

HOW TO USE REMOTE CONTROLLER

Cooling/heating/fan only operation

Start
START/STOP button (
Press this button to start the air conditioner.
Mode select button (MODE)
Select Cool , Heat
Temperature button (
Set the desired temperature.
When the air conditioner is in FAN ONLY operation,
the temperature display is not indicated.
Fan speed button (FAN)
Select one of
MED , MED
• The OPERATION lamp on the display panel
of the indoor unit goes on. And operation starts
after approximately 3 minutes. (If you select FAN
ONLY mode, the unit will start immediately.)
• The : Fan only mode does not control
temperature.
Stop
START/STOP button (
Press this button again to stop the air conditioner.
NOTE
When the indoor unit is operated together with
a cooling only outdoor model outdoor unit,
appears on the remote controller but the heating
operation is disabled.
17-EN
Carrier 1121250221.indb 17 Carrier 1121250221.indb 17
SWING FAN
)
, or Fan only .
)
LOW , LOW + ,
+ , HIGH
)

Dry operation

Start
SWING
START/STOP button (
Press this button to start the air conditioner.
Mode select button (MODE)
Select Dry .
Temperature button (
Set the desired temperature.
• The fan speed display indicates
• The OPERATION lamp on the display panel
of the indoor unit lights, and operation starts after
approximately 3 minutes.
.
Stop
START/STOP button (
Press this button again to stop the air conditioner.
– 17 –
Owner's Manual
FAN
)
)
.
)
9/26/22 11:15 AM 9/26/22 11:15 AM